Show FELCO tools

You want to maintain your tool?

Please select it from the list below.

FELCO 200A-50

FELCO 200A-50 Green

  • Two-hand pruning shears
  • Length 50 cm (19.7 in.) - STRAIGHT cutting head
Available maintenance videos:

  1. Cleaning

    FELCO 200A-50 CleaningThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

  2. Oiling

    FELCO 200A-50 OilingThe videos do not necessarily show the chosen tool. But the handling is the same.

    After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

  3. Sharpening

    FELCO 200A-50 SharpeningThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

  4. Dismantling

    FELCO 200A-50 DismantlingThe videos do not necessarily show the chosen tool. But the handling is the same.

    It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

The videos do not necessarily show the chosen tool. But the handling is the same.Warning: inappropriate handling may result in physical injuries.

Most popular videos

Show FELCO tools

You want to replace parts in your tool?

Please select it from the list below.

FELCO 200A-50

FELCO 200A-50 Green

  • Two-hand pruning shears
  • Length 50 cm (19.7 in.) - STRAIGHT cutting head
Available maintenance videos:

  1. Changing the blade

    FELCO 200A-50 Changing the bladeThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

  2. Changing the anvil-blade

    FELCO 200A-50 Changing the anvil-bladeThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

  3. Changing the shock absorbers

    FELCO 200A-50 Changing the shock absorbersThe videos do not necessarily show the chosen tool. But the handling is the same.

    When the tool closes too abruptly during pruning the shock absorbers should be changed.

The videos do not necessarily show the chosen tool. But the handling is the same.Warning: inappropriate handling may result in physical injuries.

Most popular videos